Installation Sequence; Siting The Heat Pump - Viessmann VITOCAL 300-G PRO Installation And Service Instructions Manual

Siting the heat pump

Levelling the heat pump
Position and level the heat pump horizontally as described on page 16.
1. Fitting the back panel, see the following pages
2. Fitting the programming unit into the front panel, see front panel installation
instructions page 76
3. Connecting the appliance hydraulically and electrically, see page 48 and
page 71
4. Fitting the side panels
5. Fitting the front panel and connecting the programming unit with the control unit
6. Fitting the mains isolator – observe OFF setting

Installation sequence

41