Installation Sequence; Siting The Heat Pump - Viessmann VITOCAL 300-G PRO SPS Installation And Service Instructions Manual

Installation sequence

Siting the heat pump

Levelling the heat pump
Position and level the heat pump horizontally as described on page 14.
1. Fitting the back panel, see the following pages.
2. Fitting the programming unit into the front panel, see front panel installation
instructions 59
3. Connect the hydraulics and PCB; see page 35 and page 54
4. Fitting the side panels
5. Fitting the front panel and connecting the programming unit with the control unit
6. Fitting the mains isolator – observe OFF setting
28