Selecting Another Mfx Type And Editing It; Linking Multi-Fx Type Selection To The Upper1 Part (Upper 1 M-Fx Link) - Roland E-60 Owner's Manual

All manuals and user guides at all-guides.com
(2) Press the [EFFECTS] field.
(3) Press the MFX PART ASSIGN field(s) of the Key-
board part(s) that should use the selected MFX
effect.
Note: There is only one MFX processor that is shared by all
Keyboard parts.
• Press the [EXIT] button to return to the main page.

Selecting another MFX type and editing it

The E-60/E-50 provides 41 different Multi-FX types,
some of which are combinations of two effects for
added flexibility. Here is how to select another Multi-FX
type:
(1) Press and hold the [MULTI-FX] button until the dis-
play looks as follows:
You can also select this page by pressing the [EFFECT]
button→[MFX] field and the [EDIT] field. But the
above method is a lot faster.
(2) Press the [ON] (or [OFF]) field to switch the proces-
sor on (icon lights) or off (icon goes dark).
You can also do so on the EFFECTS page (see above).
(3) Press the field below "MFX" where the name of the
currently selected type is displayed.
(4) Select the desired type with the [DATA÷ENTRY] dial
or the [DEC]/[INC] buttons.
Note: Multi-FX type selection can be linked to Tone selection
for the Upper1 part. See page 85.
The available types are:
1. Thru 15. St. Chorus
2. Stereo EQ 16. St. Flanger
3. Overdrive 17. Step Flanger
4. Distortion 18. St. Delay
5. Phaser 19. Mod. Delay
6. Spectrum 20. 3 Tap Delay
7. Enhancer 21. 4 Tap Delay
8. Auto Wah 22. Time Delay
9. Rotary 23. 2 Pitch Shifter
10. Compressor 24. FBK Pitch
11. Limiter 25. Reverb
12. Hexa-Chorus 26. Gate Reverb
13. Trem Chorus 27. OD‰ Chorus
14. Space-D 28. OD‰ Flanger
To avoid confusion, we decided to explain the avail-
able parameters elsewhere. See page 200. Here's how
to edit the parameters:
(5) Press the field of the parameter you wish to
change (the number of fields and their functions
depend on the selected type).
If the required parameter is not displayed, press the
PAGE fields to jump to another page. (Some effects
have only one parameter page.)
(6) Set the desired value with the [DATA÷ENTRY] dial or
the [DEC]/[INC] buttons.
[REVERB¥SEND] and [CHORUS¥SEND] (upper right cor-
ner) allow you to specify how strongly the multi-
effect's output signal should be processed by the
Reverb and/or Chorus processor. If that is unneces-
sary, set both parameters to "0".
(7) Press the [EXIT] button to return to the main page.
Linking Multi-FX type selection to the Upper1
part (Upper 1 M-FX Link)
If you like, the E-60/E-50 can automatically load the
Multi-FX type that is suited for the Tone you assign to
the UP1 part.
(1) Press the [MENU] button.
The display changes to:
(2) Press the [UTILITY], then the [GLOBAL] field.
29. OD‰ Delay
30. DST‰ Chorus
31. DST‰ Flanger
32. DST‰ Delay
33. EH‰ Chorus
34. EH‰ Flanger
35. EH‰ Delay
36. Chorus‰ DLY
(3) Press the [UPPER¥1¥M-FX¥LINK] field to switch it on
37. Flanger‰ DLY
38. CHO‰ Flanger
or off. If it is on, the E-60/E-50 selects a suitable
39. CHO/Delay
MFX type for each sound you assign to the UP1
40. Flanger/DLY
41. CHO/Flanger
part.
(4) Press the [EXIT] button to return to the main page.
E-60/E-50 Music Workstation
Using the multi-effects processor (Multi-FX)
MENU
r
85