Repair Work - Safety Instructions - New Holland LW50 Service Manual

TECHNICAL HANDBOOK LW 50

Repair work - safety instructions

Operating instructions
Never carry out repair work without hav-
ing read and understood the operating
instructions.
Pay special attention to:
"Fundamental Safety Instructions",
"Inspection and servicing - safety instruc-
tions" and all warnings and safety instruc-
tions attached to the machine.
The descriptions of job sequences pro-
vide only experienced personnel with the
necessary instructions.
The operating manual must be kept with
the machine at all times.
Repair personnel
Repair personnel must have know-how
and experience relevant to repairing this
or comparable machines.
Working at greater heights
Always wear safety harnesses when work-
ing at greater heights.
Wear an approved safety harness; it must
be equipped with stabilizers and safety
cables.
8
Pressurized or spring loaded units
Never open defective pressurized or
spring loaded units but replace them as
an entirety.
In exceptional cases, open only when the
system and the operating sequence are
precisely known and any special tools re-
quired are available.
The technical handbook contains no in-
formation on this point.
Never remove lead seals
Never change rated pressure of pressure
relief valves without the explicit authoriza-
tion of NEW HOLLAND CONSTRUCTION.
Never remove lead seals from pressure
relief valves and accumulators.
01
2801063
73179329