Table of Contents
Advertisement
TECHNICAL HANDBOOK LW 50
ENGINE
Engine - repair instructions
Read and observe: "Repair, safety instruc-
tions" and operating instructions for en-
gine before working on the engine.
Risk of injury from rotating or hot engine
parts!
Switch off engine and leave to cool down.
Do repair work only if machine is secured
as described in section "Securing the ma-
chine" of these operating instructions.
Check and change V-belts only when en-
gine is stationary.
Repair work on the engine demands ex-
tensive know-how and special tools.
In cases of doubt, have the repair work
carried out by your Dealer.
10
Assisted starting (with jumper ca-
2801064
bles) - safety instructions
Keep any potential ignition sources such
as unshielded lights or burning cigarettes
away from the batteries. The battery vap-
ours are highly flammable. Explosion ha-
zard.
Never use assisted starting when the bat-
teries are defective or frozen.
N e v e r c o n n e c t b a t t e r i e s ( b a t t e r y
assemblies) unless they have the same
voltage.
Use only tested jumper cables with in-
sulated terminal clips and an adequate
lead diameter.
Ensure that the bodies of the supplying
and receiving machines are not in con-
tact. Otherwise a current flow could result
from connecting the positive poles. Risk
of short-circuiting.
Never use welding generators or welding
transformers as a source of current.
Position the jumper cables in such a way
that they cannot be caught by rotating
engine components.
Read and observe: "Inspection and ser-
vicing, safety instructions", paying par-
ticular attention to the section "Handling
batteries".
01
2800620
73179329
Advertisement
Chapters
Table of Contents
