TECHNICAL HANDBOOK LW 50
Hydraulic and pneumatic equipment
Check all lines, hoses and screwed connections
regularly for leaks and obvious damage. Repair
damage immediately. Splashed oil may cause in-
jury and fire.
Depressurize all system sections and pressure
pipes (hydraulic system, compressed-air system)
to be removed in accordance with the specific
instructions for the unit concerned before carrying
out any repair work.
Hydraulic and compressed-air lines must be laid
and fitted properly. Ensure that no connections
are interchanged. The fittings, lengths and quality
of the hoses must comply with the technical re-
quirements.
Noise
During operation, all sound baffles of the machine
must be closed.
Always wear the prescribed ear protectors.
Oil, grease and other chemical sub-
stances
When handling oil, grease and other chemical
substances, observe the product-related safety
regulations.
Be careful when handling hot consumables (risk
of burning or scalding).
73179329
Transporting and towing - recom-
missioning
The machine must be towed, loaded and trans-
ported only in accordance with the operating
instructions.
For towing the machine observe the prescribed
transport position, admissible speed and itinerary.
Use only appropriate means of transport and lift-
ing gear of adequate capacity.
The recommissioning procedure must be strictly
in accordance with the operating instructions.
01
7