Adjusting The Speaker Volume - Sony MHC-D90AV Operating Instructions Manual

Step 2: Setting up your speakers
(continued)
Adjusting the speaker
volume
To enjoy Dolby Pro Logic Surround sound,
turn the Dolby Pro Logic mode on, then
adjust the volume of each speaker using the
test tone that the system provides.
POWER
0 )
...
» Æ
„
Æ
» Æ
⁄
» Æ
= + p
0 ) P
4
$
8
1
2
1
3
„
Æ‚
⁄
4
...
» Æ
„
Note
The test tone feature works only for Dolby Pro Logic
Surround sound.
⁄
Tip
If you turn VOLUME (or press VOLUME +/– on the
remote) all the speaker volumes change.
PRO LOGIC ON/OFF
3
2,4
Press PRO LOGIC.
"PRO LOGIC ON" appears.
Press T.TONE ON/OFF on the
remote.
The test tone is heard from the speakers
in the following order. Adjust the
volume of the test tone.
Front (left) n Center n Front (right)
Rear
From your listening position, press
CENTER LEVEL (+/-) and REAR
LEVEL (+/-) on the remote to adjust
the volume.
The volume levels from each speaker
must become the same.
Press T.TONE ON/OFF when you
are done adjusting.
The test tone is turned off.