Adjusting The Speaker Volume - Sony MHC-GRX10AV Operating Instructions Manual

Step 2: Setting up your speakers
(continued)
3
Connect the center surround
speaker.
Connect the speaker cords fron the
center surround speaker to the
appropriate CENTER SURROUND
SPEAKER jacks.
Connect the solid cord to the red jacks
and connect the striped cord to the black
jacks.
Keep the speaker cords away from the
antennas to prevent noise.
Insert only the stripped portion.
Solid (')
4
Set VOLTAGE SELECTOR to
position of your local power line
voltage (for models with a voltage
selector).
VOLTAGE
5
Connect the power cord to a wall
outlet.
Demo mode appears in the display.
8
Stripe (')
SELECTOR
-
6
Deactivate the demo mode by
pressing DEMO when the system
power is turned off.
The demo mode is also deactivated
when you set the time.
Tip
You can reinforce the bass sound by connecting an
optional super woofer to the super woofer
connector.
Adjusting the speaker
volume
To enjoy Dolby Pro Logic Surround sound,
turn the Dolby Pro Logic mode on, then
adjust the volume of each speaker using the
test tone that the system provides.
(Power)
·
ª ·
ª ·
= + p
0 ) P
· P p
◊
√
1
1
2, 4
3