Sony MHC-D90AV Operating Instructions Manual page 18

Listening to the radio (continued)
1
Press TUNER/BAND repeatedly
until the band you want appears in
the display.
Every time you press the button, the
band changes as follows:
North and South American, Australian
and Thai models:
F M ˜ A M
Other models:
FM n MW n SW
2
Press TUNING MODE repeatedly
so that "PRESET" appears in the
display.
MANUAL n AUTO n PRESET
3
Turn the jog dial (or press = or
+ on the remote) to tune in the
desired preset station.
Turn counter-
clockwise
(or press =
–
on the remote)
for lower preset
numbers.
Preset number
PRESET
To Do this
Turn off the radio Press POWER.
Adjust the volume Turn VOLUME (or press
VOLUME +/– on the
remote).
18
To listen to non-preset radio
stations
Press TUNING MODE repeatedly so that
"MANUAL" appears in step 2, then tune in
the station by turning the jog dial.
Tips
• Pressing TUNER/BAND when the power is off
automatically turns the power on and tunes to the
last received station (One Touch Play).
• You can switch from another source to the radio
just by pressing TUNER/BAND (Automatic
Source Selection).
• When an FM program is noisy, press
STEREO/MONO so that "MONO" appears in the
display. There will be no stereo effect, but the
reception will improve. Press the button again to
restore the stereo effect.
• To improve broadcast reception, reorient the
supplied antennas.
Turn clockwise
(or press +
on the remote)
+
for higher
preset numbers.
Frequency
TUNED
STEREO
VOLUME
MHz