Nikon SMZ800N Instruction Manual page 13

CAUTION
● The total mass of the microscope system can be
as high as approx. 17 kg. When moving the
system to another location, temporarily remove
any removable devices and carry the system by
firmly holding the hand holding portions of the
base (several people are needed). Do not lift the
system by holding the binocular part of the tube
or placing hands on the bottom of the objective.
● Do not place this system in a locker or cabinet.
13 Cautions on sustained observation
To relieve fatigue resulting from long observation
sessions, limit continuous observations to one
hour. Take at least a 10 to 15-minute break
between observation sessions. Adjust the layout of
other instrument used and the height of your chair.
14 Cautions on use, transportation, and storage
This product must be operated, transported, and
stored in accordance with the following conditions.
If the product is installed in a location with high
temperature and high humidity, mold and/or
condensation may form on the lenses. This may
result in performance deterioration or malfunction.
● Operating conditions:
temperature: 0 to +40C, humidity:
60% RH max. at 40C (no
condensation)
● Transporting/storage conditions:
temperature: -20 to +60C,
humidity: 90% RH max. (no
condensation)
15 Caution on the disposal of the product
When disposing of this product, follow the rules of
the facility. To avoid exposure to biohazard, dispose
of a P-PS32 Plain Stand, a P-DSL32 LED
Diascopic Illumination Stand and P-DSF32 Fiber
Diascopic Illumination stand as contaminated
devices in accordance with the xstandard
procedures of your facility.
Safety Precautions
xi