The Queue Setup Screen - ZyXEL Communications LTE5121 User Manual

Hide thumbs Also See for LTE5121:
Table of Contents

Advertisement

The following table describes the labels in this screen.
Table 33 Network Setting > QoS > General
LABEL
Active QoS
WAN Managed
Upstream
Bandwidth
Traffic priority
will be
automatically
assigned by
Apply
Cancel

9.3 The Queue Setup Screen

Use this screen to configure QoS queue assignment. Click Network Setting > QoS > Queue
Setup to open the screen as shown next.
Figure 71 Network Setting > QoS > Queue Setup
LTE-5121 User's Guide
DESCRIPTION
Select the check box to turn on QoS to improve your network performance.
You can give priority to traffic that the LTE Device forwards out through the WAN
interface. Give high priority to voice and video to make them run more smoothly.
Similarly, give low priority to many large file downloads so that they do not reduce
the quality of other applications.
Enter the amount of bandwidth for the WAN interface that you want to allocate
using QoS.
The recommendation is to set this speed to match the interface's actual
transmission speed. For example, set the WAN interface speed to 1000 kbps if
your Internet connection has an upstream transmission speed of 1 Mbps.
Setting this number higher than the interface's actual transmission speed will stop
lower priority traffic from being sent if higher priority traffic uses all of the actual
bandwidth.
If you set this number lower than the interface's actual transmission speed, the
LTE Device will not use some of the interface's available bandwidth.
Leave this field blank to have the LTE Device set this value automatically.
These fields are ignored if upstream traffic matches a class you configured in the
Class Setup screen.
If you select IP Precedence or Packet Length and traffic does not match a class
configured in the Class Setup screen, the LTE Device assigns priority to
unmatched traffic based on the IP precedence or packet length.
See
Section 9.6.1 on page 113
Click Apply to save your changes.
Click Cancel to restore your previously saved settings.
Chapter 9 Quality of Service (QoS)
for more information.
105

Advertisement

Table of Contents
loading

Table of Contents