Care And Cleaning - Breville 800ES Manual

24
Cleaning

CARE AND CLEANING

• Ensure the Selector Control is in the 'Standby'
CLEANING THE STEAM WAND AND
position. Press the "on/off" button to off,
FROTHING ATTACHMENT
switch off at the power outlet, unplug the
• The Steam Wand and Frothing Attachment
power cord and allow the machine to cool.
should always be cleaned after frothing milk.
• If the Steam Wand remains blocked, use the
• Remove the Frothing Attachment and rinse in
pin on the Cleaning Tool to clear the opening.
warm tap water. Ensure the two fine steam
holes on either end of the Frothing
• If the Steam Wand continues to be blocked,
Attachment are clear. Use the pin on the
the tip of the Steam Wand can be removed
Cleaning Tool to unblock these holes.
by using the spanner in the middle of the
Cleaning Tool.
• Wipe the Steam Wand with a damp cloth,
then with the Steam Wand directed back into
the drip tray, briefly set the Selector Control
to the 'Steam' position and press the Hot
Water button. This will clear any remaining
milk from inside the Steam Wand.
• Soak the tip in hot water before using the pin
on the Cleaning Tool to unblock. Replace the
tip back onto the Steam Wand and secure
with the Cleaning Tool.
25
CARE AND CLEANING