Care & Cleaning - Breville the Bambino Instruction Book

Care & Cleaning
CLEAN & DESCALE CYCLE
When descale cycle counter reaches 250,
the 2 Cup button will continuously flash;
indicating machine will need cleaning and
descaling.
WARNING
Do not immerse the power cord, power plug
or appliance in water or any other liquid.
The water tank should never be removed or
completely emptied during descaling.
TO PERFORM A CLEAN &
DESCALE CYCLE
1. Empty the drip tray and re-insert firmly into
position on the machine.
2. Fill the water tank to the DESCALE line
indicated and add the descaling agent to
the water.
1000
DESCALE
3. Place a 2L container under the group head
and steam wand.
16
2
L
68oz
1000
1000
DESCALE
DESCALE
2
68oz
+
4. Press the 2 Cup and Steam buttons
simultaneously for 5 seconds to start
descaling.
OR
1000
DESCALE
NOTE
The 2-Cup button will flash throughout the
cycle.
5. Once the descale solution has been used up,
the descale mode will pause.
6. Rinse and refill the water tank to the MAX
MAX
line and empty the waste water container,
then replace both parts on to the machine to
proceed onto the rinse cycle.
7. Press the 2 Cup button to proceed rinse
cycle.
OR
8. When the rinse cycle is complete, the
machine will then go into ready mode.
MAX
9. Remove and empty the waste water
container. Rinse the drip tray and water tank
and dry thoroughly before replacing them
MAX
back onto the machine.
2
L
L
68oz
5s
+
0.5s
2
L
68oz
&
+
OR
5s
0.5s
&
5s
0
&