Canon LASER SHOT LBP-1210 User Manual page 44

If you are using Windows 95 OSR2.1 or later, an error may occur while
trying to install using plug and play. If you get an error, install the
software using the CD-ROM. To check which version of Windows 95 you
are using, open the System window in Control Panel and look at the
version number in the General tab. 4.00.950 B or 4.00.950 C means you
are using OSR2.1 or later.
Using USB Port (USB Cable)
In order to use the printer via USB, the following requirements need to be
satisfied.
❏ Your computer must be equipped with a USB port and it is necessary
that its operation is approved by the manufacturer.
❏ Windows 95 is not available for USB.
The following procedure only applies to the installation under Windows
98.
The first time you start Windows with the LBP-1210 attached to your
computer, the New Hardware Found dialog box appears, then
click Next >.
When using parallel port, go to Step 3.
1. Select Search for the best driver for your device (Recommended)
in the Add New Hardware Wizard and click Next >.
Chapter 3 Using the Canon Advanced Printing Technology
27