Canon LASER SHOT LBP-1210 User Manual page 145

Problem
Printer locks up
system
Computer
indicates a device
time-out
128
Troubleshooting
Cause
Your system setup might
be a problem.
Your computer is sending
data to the printer but the
printer is not responding.
The printer might be off,
offline, or not connected to
the computer.
Solution
Verify that you have a high-
quality shielded interface cable.
The problem might be your
BIOS. Verify that your BIOS
setup is correct. (See your
computer's documentation for
details.)
Verify that your physical memory
is working correctly.
If you have a Toshiba laptop,
change this line in your
CONFIG.SYS file:
c:\winutils\mxtime.exe
to:
REM c:\winutils\mxtime.exe
Make sure the printer is not
paused.
Check that the printer's interface
cable is securely connected to
both the printer and the
computer.
Make sure paper is properly
loaded in the cassette.
Reset the printer and computer.
Try the print operation again.
Try a different cable.
Chapter 4