Canon LASER SHOT LBP-1210 User Manual page 140

❏ After you replace the cartridge and close the front cover, the printer
should be ready for printing. If the printer returns to the ready state for
printing, troubleshooting has been successful. If the printer does not
return to the ready state for printing, confirm that the paper release
levers are placed back to their original position, and check to see that
paper is not left in the printer.
❏ While removing the jammed paper, some toner might stain the inside
of the printer which will make the first few printouts dirty when
printing resumes.
Chapter 4
123
Troubleshooting