Canon LASER SHOT LBP-1210 User Manual page 144

Problem
Printer stops
printing
Printout is wrong
Chapter 4
Cause
AC voltage might not
match printer.
Your interface cable might
be loose.
You might be working on
an application in the
foreground, in which case
printing performance
might slow down.
There might be a
communications problem
between the printer and
your computer.
The wrong printer is
selected in the Printers
folder.
You might need to modify
your BIOS setup.
Solution
Make sure the voltage of the AC
outlet matches the ratings on the
printer.
Check your computer and your
cable.
Printer performance improves if
you give your print job priority.
Make sure your cable
connections are secure.
Make sure your interface cable is
less than 6.6 feet (2.0 m) long.
Make sure you are not using a
switch box.
Check that you have selected the
correct printer driver in
Windows.
Make sure the LBP-1210 is
selected in the Printers folder.
See your computer's
documentation for details. Try
changing the parallel port mode
or the parallel port address to see
if this solves the problem.
Troubleshooting
127