Classification Of Defectives; Inspection Standard - BenQ PB6100 Service Manual

6.0 CLASSIFICATION OF DEFECTIVES

A defective is a product which contains one or more defects. The
defective will be classified into following classes:
6.1 Critical defective
A critical defective contains one or more critical defects and may
also contain major and/or minor defects.
6.2 Major defective
A major defective contains one or more major defects and may also
contain minor defects but contains no critical defect.
6.3 Minor defective
A minor defective contains one or more minor defects but contains
no critical and major defects.

7.0 INSPECTION STANDARD

Unless otherwise specified, the inspection standard will be defined by
MIL-STD-105E, NORMAL INSPECTION LEVEL Ⅱ , SINGLE SAMPLING PLAN.
7.1 Acceptance Quality Level
7.1.1 Critical Defect:
When a critical defect is found, this must be reported immediately
upon detection, the lot or batch shall be rejected and further
shipments shall be held up pending instructions from the
responsible person in relevant department.
7.1.2 Under normal sampling
Critical Defective :
Major Defective : 0.65% AQL
Minor
7.1.3 Under special sampling
Critical
Major
Minor
0% AQL
Defective : 2.5% AQL
Defective : 0% AQL
Defective : 1.0% AQL
Defective : 4.0% AQL
80