BenQ PB6100 Service Manual page 55

5. Curtain Blue: unit display full color blue.
Lamp layer (Fig-6):
V.
(Fig-6) Lamp layer
1. Interpolation: De-interlace Mode
2. Filter: system auto select Filter.
3. Lamp Hour: value to tell you lamp usage hours.
4. Usage Hour: value to tell you unit usage hours.
5. Fac Lamp Hours: Record all of the amp usage hours
6. Data Reset: Reset all data to default include factory assign value.
Others layer (Fig-7):
VI.
1. Gamma index: system auto select DLP gamma index
2. Gray value: adjust here to check DMD fail pixel.
Never try to reset all data.
(Fig-7) YPbPr layer
55