Part Ⅰ Inspection Criteria; Packing, Marking And Accessory; Appearance On Visible Parts; Installation - BenQ PB6100 Service Manual

PART Ⅰ INSPECTION CRITERIA

■ Packing, marking and accessory

△ Inner packing material broken.
△ Carton damaged with hole over 1.5 cm in diameter.
△ Carton crashed with dent over 5 cm in diameter.
△ Printing of carton is illegible.
△ Broken packing bag
☆ Spec. label's serial number not the same as carton label's.
☆ Packing model not the same as carton.
☆ Marking missing/wrong.
☆ Accessory shortage/wrong.
☆ Projector missing(found none in carton).
☆ Label on box missing or damaged
☆ Strange objects in the box

■ Appearance on visible parts

△ Poor printing on panel sticker(segment broken, illegible).
△ Damage or deviation when viewed at a distance of 50 cm.
△ Cover/case is dirty(removable).
△ Cover/case exists black spot(irremovable).
△ Cover/case is scratched.
△ Spec Label reverse, rugged, illegible printing.
△ LED sink over 1 mm.
☆ Label/screws shortage or missing.
☆ Wrong logo of panel sticker.
☆ Wrong spec. label printing.
☆ Label on product wrong or missing

■ Installation

☆ Any accessory which are failed
to meet the installation purpose
(Note 1)
minor
minor
minor
minor
minor
Major
Major
Major
Major
Major
Major
Major
minor
minor
minor
minor
minor
minor
minor
Major
Major
Major
Major
Major
83