Safety Interlock System - Toro Pro Sweep 5200 Service Manual

Safety Interlock System

CAUTION
Do not disconnect the Pro Sweep 5200 hopper
down proximity switch. It is for the operator's
protection. Check operation of the switch daily
to make sure the interlock system is operating
correctly. If the switch is not operating properly,
adjust or replace it before operating the sweep-
er.
Electrical System
The safety interlock system of the Pro Sweep 5200 en-
sures that the brush will not rotate when the dump hop-
per is in the raised position.
Interlock system operation is described in the Pro
Sweep 5200 Operator's Manual. Testing procedures for
the interlock system hopper down proximity switch and
brush relay are included in the Component Testing sec-
tion of this Chapter.
Page 4 – 4
Pro Sweep 5200