Product Records; Maintenance - Toro Pro Sweep 5200 Service Manual

Product Records and Maintenance
Table of Contents
PRODUCT RECORDS . . . . . . . . . . . . . . . . . . . . . . . . . 1

MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

EQUIVALENTS AND CONVERSIONS . . . . . . . . . . . 2
Decimal and Millimeter Equivalents . . . . . . . . . . . . 2
U.S. to Metric Conversions . . . . . . . . . . . . . . . . . . . 2
TORQUE SPECIFICATIONS . . . . . . . . . . . . . . . . . . . 3
Fastener Identification . . . . . . . . . . . . . . . . . . . . . . . 3

Product Records

Insert Operator's Manual and Parts Catalog for your Pro
Sweep 5200 at the end of this chapter. Additionally, if
any optional equipment or accessories have been
installed to your machine, insert the Installation Instruc-
tions, Operator's Manuals and Parts Catalogs for those
options at the end of this chapter.
Maintenance
Maintenance procedures and recommended service in-
tervals for the Pro Sweep 5200 are covered in the Oper-
ator's Manual. Refer to that publication when performing
regular equipment maintenance.
Pro Sweep 5200
Standard Torque for Dry, Zinc Plated and
Steel Fasteners (Inch Series) . . . . . . . . . . . . . . . 4
Standard Torque for Dry, Zinc Plated and
Steel Fasteners (Metric Fasteners) . . . . . . . . . . 5
Other Torque Specifications . . . . . . . . . . . . . . . . . . 6
Conversion Factors . . . . . . . . . . . . . . . . . . . . . . . . . 6
Page 2 - 1 Product Records and Maintenance
Chapter 2