Connections - ABB AV410 User Manual

...6 INSTALLATION
...6.5 Electrical Connections
6.5.4 Connections – Fig. 6.11
Before making
any electrical

connections,

refer to the
Warnings on
page 36
Factory-fitted Links.
DO NOT REMOVE
Earth (Ground)
Stud on Case
(see Fig. 6.10)
Cleaner Module
Receiver
Module
Notes.
• The screens of the sensor's emitter, receiver and cleaner cables
connected to the earth (ground) stud fitted to the transmitter case closest to the cable's entry point – see Fig. 6.10.
• Dual input versions – connect each sensor to the correct input terminals (A or B) as indicated on the sensor's cables.
• Use the three-hole cable gland provided with the sensor for the sensor cables.
42
Terminal Block A
Emitter
Module
7320 100 Sensor
Fig. 6.11 Connections
Terminal Block C
Terminal Block B
Sensor Sensor
B A
B1 B9
B2 B10
B3 B11
B4 B12
B5 B13
B6 B14
B7 B15
B8 B16
Terminal Block C
Sensor Sensor
B A
C9 C3
C10 C4
C11 C5
C12 C6
be enclosed in yellow/green sleeving and
must
Terminal Block B
Flowcell Connections
Emitter 0V
Emitter +24V
Emitter Trigger –ve
Emitter Trigger +ve
Receiver +12V
Receiver 0V
Receiver Reference Signal
Receiver UV Signal
Flowcell Connections
Cleaner +12V
Cleaner Trigger
Acknowledge
Cleaner 0V
Cable
Colors
Blue
Red
Green
Yellow
Red
Blue
Green
Yellow
Cable
Colors
Red
Green
Yellow
Blue