Avaya 1040E User Manual page 63

Figure 13: Rotate the IP Deskphone into the wall mount
position.
Method B:
1. Attach the 15-cm (6-inch) CAT5e cable.
2. Position the stand over the mounting rivets, and slide the IP
Deskphone down the wall so that the rivets fit into the slots on the
stand, indicated in
3. Replace the stand cover. Ensure that all cables are neatly routed and
press the stand cover into place until you hear a click.
4. Put the IP Deskphone in the wall-mount position (optional). If you
wall-mount your IP Deskphone, put it in the wall-mount position by
holding the Tilt Lever and pressing the IP Deskphone towards the
base until the IP Deskphone is parallel with the base. Release the Tilt
Lever and continue to push the IP Deskphone towards the base until
you hear an audible click. Ensure the IP Deskphone is securely
locked in position.
Figure 12 on page 61
Using your IP Deskphone
(Method B).
63