Software Upgrade - ResMed AirCurve 10 VAUTO Clinical Manual

For more information on therapy management with AirView or ResScan, refer to the manuals
supplied with the software.
Type of data
Summary data (compliance data)
Detailed data
High resolution flow and pressure data
(25 Hz - every 40 ms)
Detailed data are stored on the SD card and can be viewed via ResScan or AirView. Examples of
detailed data available are shown below.
Detailed data
Parameter
Apnea or hypopnea events
Flow limitation (flat to round)
Leak (L/sec)
Minute ventilation (L/min)
Pressure (cm H O / hPa)
2
Snore (quiet to loud)
Pulse rate (beats/min)—if an oximeter adapter is attached
Oxygen saturation (SpO )—if an oximeter adapter is attached
2

Software upgrade

The device has a software upgrade feature. When a software upgrade is in progress, the screen will
flash for approximately 10 minutes.
30
Transmission method
Cellular SD card to
communication ResScan
to AirView


SD Card to
AirView
(card-to-cloud)
 
 

Sampling rate
ResScan
aperiodic
1/2 Hz (2 sec)
1/2 Hz (2 sec)
1/2 Hz (2 sec)
1/2 Hz (2 sec)
1/2 Hz (2 sec)
1 Hz (1 sec)
1 Hz (1 sec)
Sessions stored
365
Limited by usage and
SD card storage
capacity
AirView
aperiodic
1 min
1 min
1 min
1 min
1 min
1 min
1 min