Packaging And Storage; Data Management And Therapy Compliance - ResMed AirCurve 10 VAUTO Clinical Manual

To insert the water tub seal:
1. Place the seal into the lid.
2. Press down along all edges of the seal until it is firmly in place.
To reassemble the water tub lid:
1. Insert one side of the lid into the pivot hole of the base.
2. Slide the other side down the ridge until it clicks into place.

Packaging and storage

Store in a dry, dust-free environment away from direct sunlight.
Storage temperature: -4°F to 140°F (-20°C to 60°C).

Data management and therapy compliance

For therapy management, the AirCurve 10 device stores patient therapy data on the device and may
have the ability to transfer it remotely to the care provider if wireless network is available. Data can
then be accessed via ResMed's AirView therapy management solution.
™
The AirCurve 10 device also stores data on the SD card. This data can be transferred via an SD Card
Reader to ResMed's ResScan therapy management system.
™
For more information on therapy management with AirView or ResScan, refer to the manuals
supplied with the software.
28