ResMed AirCurve 10 VAUTO Clinical Manual page 41

FCC ID: 2ACHL-AIR104G, 2ACHL-AIR103G
IC: 9103A-AIR104G, 9103A-AIR103G
The AirCurve 10 device complies with FCC Rules and Industry Canada rules.
The AirCurve 10 device should be used at a minimum distance of 0.8" (2 cm) from the body during operation.
Additional information regarding the FCC Rules and IC compliance for this device can be found on
www.resmed.com/downloads/devices
Operating pressure range
S, ST, T:
VAuto:
CPAP:
Supplemental oxygen
Maximum flow:
Pneumatic flow path
Design life
Device, power supply unit:
Cleanable water tub:
Standard water tub, air tubing:
General
The patient is an intended operator.
Humidifier performance
Mask Pressure
cm H O (hPa)
2
3
4
10
20
25
1
AH - Absolute Humidity in mg/L
2
BTPS - Body Temperature Pressure Saturated
38
RH output % at
63°F (17°C) ambient
temperature
Setting 4
85
85
85
85
85
3 to 25 cm H
4 to 25 cm H
4 to 20 cm H
For VAuto device: 4 L/min (CPAP, S, VAuto)
For S device: 4L/min (CPAP, S)
For ST device: 15 L/min (CPAP, S, ST, T)
1. Flow sensor
2. Blower
3. Pressure sensor
4. Mask
5. Air tubing
6. Water tub
7. Device
8. Inlet filter
5 years
2.5 years
6 months
RH output % at
72°F (22°C) ambient
temperature
Setting 8
100
100
100
90
90
O (3 to 25 hPa)
2
O (4 to 25 hPa)
2
O (4 to 20 hPa)
2
Nominal system output AH
Setting 4
6
6
6
6
6
1 , BTPS 2
Setting 8
>10
>10
>10
>10
>10