Description Of Computer Software - Alpine PXE-X800 Manual

Description of computer software

1 Temperature display
2 File
3 Options
4 Encryption
5 EQ gain step size
6 Mute button
7 Master volume
8 Homepage
9 EQ
10 Delay
11 Combined frequency
12 Output channel display
13 EQ curve
Frequency, Q value,
14
gain
Parametric EQ, graphic
15
EQ
16 Low-pass filter
17 High-pass filter
18 Channel phase
19 Bass phase
20 Channel gain
Pass-through
21 equilibrium, restore
equilibrium
22 Reset equilibrium
23 Output channel
24 Connection indication
25
Detect the temperature on the surface of the device.
Load or save scene files in the computer, load or save scene files of the whole device.
Firmware update, noise threshold, built-in power amplifier, restore factory settings,
shutdown delay, switch between Chinese and English, version number display.
Enter 6-digit encrypted password to encrypt the tuned sound effect data.
The step size is selectable. Step size range: 0.1 dB ~ 0.5 dB ~ 1.0 dB.
Master volume set to mute.
Drag the fader left and right to adjust the volume.
Master sound source selection (digital, high level, Bluetooth and low level), auxiliary
sound source selection (digital, high level, Bluetooth, low level and off), master sound
source attenuation adjustment, pre-set sound effects call or storage
Enter the EQ interface, professional tone-tuning interface.
Enter the Delay interface to set delay value, delay unit and delay group.
Enter the Combined Frequency interface for sound mixing and frequency mixing
settings.
Display the curve of the output channel.
Display the current EQ curve status, set frequency, Q value and gain.
Adjustment of frequency, Q value, and gain for output channel . The gain is adjustable
but the frequency and Q value are fixed in the Graphic EQ interface. The frequency,
Q value and gain are all adjustable in the Parametric EQ interface.
Switch between parametric EQ mode and graphic EQ mode, which will cause loss of all
settings.
Turn on or off the low-pass filter to cut off high frequency.
Select filter type: (Linkwitz-Riley, Butterworth and Bessel).
Select divider frequency (between 20 Hz and 20 kHz).
Select frequency division slope (-6dB/Oct, -12dB/Oct, -18dB/Oct, -24dB/Oct, -30dB/Oct,
-36dB/Oct, -42dB/Oct or -48dB/Oct).
Turn on or off the high-pass filter to cut off low frequency.
Select filter type: (Linkwitz-Riley, Butterworth and Bessel).
Select divider frequency (between 20 Hz and 20 kHz).
Select divider frequency (-6dB/Oct-12dB/Oct-18dB/Oct-24dB/Oct-30dB/Oct, -36dB/Oct-
42dB/Oct or -48dB/Oct).
Select the channel phase (normal phase or reverse phase).
Bass phase adjustment for output channel, adjustment range: 0°~360°.
Drag the fader left and right to adjust the output channel gain, that is, to adjust the
volume of output. The adjustment range is -60 dB ~ +6 dB.
Switch adjusted EQ data to pass-through state and click on it again to restore to EQ data
before pass-through.
Reset EQ setting.
There are 12 output channels to choose from. Configure the output channel type.
Click on the speaker to mute the channel.
Connect the computer and the main device with a USB cable. Open the software to
connect, click on it again to disconnect.