Description Of Mobile Phone App - Channel - Alpine PXE-X800 Manual

Description of mobile phone APP - Channel

1 Joint debugging
2 Lock
3 Slope
4 Output channel
5 Frequency divider
6 Filter type
7 Divider frequency
8 Channel type
9 Channel volume
10 Channel phase
11 Bass phase
Reset channel
12
type
21
There are joint debugging modes of "Copy channel EQ / volume from left to right"
or "Copy channel EQ / volume from right to left" available.
The current channel type can be locked.
Select frequency division slope (-6dB/Oct, -12dB/Oct, -18dB/Oct, -24dB/Oct,
-30dB/Oct, -36dB/Oct, -42dB/Oct or -48dB/Oct).
Slide left and right to select the output channel to set. There is a total of 12
channels to choose from.
Turn on or off high-pass / low-pass.
Select filter type: (Linkwitz-Riley, Butterworth and Bessel).
Select divider frequency (between 20 Hz and 20 kHz).
Select the output channel type in the pull-down menu.
Drag the fader left and right to adjust the channel volume and the adjustment
range is -60 dB ~ 6 dB; chick the speaker button to mute the channel.
Select the channel phase (normal phase or reverse phase).
Bass phase adjustment for output channel, adjustment range: 0°~360°.
Select "Clear" to set the current channel type as empty;
Select "Confirm" to set the current channel type as factory setting;