Step 2. Assembly - North Star M157116C.2 Owner's Manual

You must assemble your pressure washer before it can be used. Refer to Fig157115_4 and follow the
steps listed below:
INSTALL NOZZLES INTO
DESIGNATED NOZZLE
STORAGE LOCATION
Step 1. Install Nozzles into designated nozzle storage location.
Step 2. Install 1" Nipple & 1" Ball valve into 1" bulk head on water tank. See figure Below.
Assembly and Initial Set-Up

STEP 2. ASSEMBLY

NIPPLE
BALL VALVE
Fig157116_10
12
Fig157116_4
SKID