North Star M157116C.2 Owner's Manual page 38

Hot water/steam pressure washer
Table of Contents

Advertisement

Perform engine
maintenance
Change pump oil
Maintenance & Repair
Perform engine maintenance as specified in the engine owner's manual.
Engine maintenance items include:
1. Changing oil and oil filter
2. Air filter check/replacement
3. Spark plug cleaning and replacement
4. Fuel filter check/replacement
5. Inspecting and cleaning muffler (and spark arrestor if equipped)
Change the pump oil after the first 40 hours of use, and then after every 3 months
or 500 hours of use after that.
1. Remove drain plug from pump.
2. Drain pump oil into suitable container and dispose of responsibly.
3. Reinstall oil drain plug.
4. Make sure unit is sitting level. Fill pump with 18 oz. of SAE 30 non-detergent
oil or Cat Pump Oil Item #22158 oil to middle of sight glass.
5. Replace oil fill cap.
OIL SIGHT GLASS
OIL CAP
PLUG
38
DRAIN HOSE
Fig157116_5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

157116

Table of Contents