Advertisement
Legacy Desk Shell • LDS4224, LDS6030, LDS6630, LDS7124, LDS7135, LDSBF7135 • INSTRUCTIONS
STEP 1: Attach Desk Front (B) to one of the Desk Sides
(C) by lining up the Eclip with its corresponding holes,
and sliding into place (see figure 1).
C
STEP 3A: Remove Thumb Screw from Desk Top (A) before assembly. Next, attach Desk Top (A) to the assembled base
by lining up the Eclip with its corresponding holes, and sliding into place (see figure 2.)
STEP 3B: Finally, place Thumb Screw into the front angle bracket
connecting the Desk Top (A) to the Desk Front (B) (see figure 3.)
Any problems or questions call Regency Office Furniture at 1-866-816-9822 or at customerservice@regencyof.com
Organize your parts. You may need a rubber mallet.
B
C
Figure 1
A
STEP 2: Attach the remaining Desk Side (C) to the Desk
Front (B) by lining up the Eclip with its corresponding
holes, and sliding into place.
C
B
B
A
Figure 2
Figure 3
C
Advertisement
