Advertisement
5)
Disconnect the three connectors [7].
6)
Release the two claws [8] of the harness retainer, and detach
the motor harness [9].
[9]
[8]
7)
Remove the stop ring [10], and detach the timing belt [11].
8)
Disconnect the connector [12], and free the harness [14] from
the edge saddle [13].
[11]
[10]
9)
Remove the two screws [15], and slide the processing tray
assembly [16] to the rear; then lift it to detach.
[16]
[15]
[7]
[12]
[14]
[13]
MX-FNX2/AR-PN1/MX-RBX1 DISASSEMBLY AND ASSEMBLY 6 – 6
(6) Paddle Assembly
1)
Remove the processing tray assembly. (See B.(3).)
2)
Place the processing tray assembly [1] as shown.
NOTE: Be sure to take care not to damage the aligning plate
[2].
[2]
3)
Detach the timing belt [3], and remove the two screws [4].
[4]
4)
Separate the processing tray assembly [5] and the paddle
assembly [6] as shown.
[5]
[1]
[3]
[4]
[6]
Advertisement
Chapters
