(3) Removing the Punch Unit
1)
Remove the waste case.
2)
Remove the screw [1] to detach the jam processing cover [2].
[1]
3)
Disconnect the connector [3].
4)
Remove the harness [5] from the harness guide [4].
[4]
5)
Disconnect the connector [6].
6)
Remove the screw [7] and sensor support plate [8].
[7]
[8]
[2]
[3]
[5]
[6]
MX-FNX2/AR-PN1/MX-RBX1 DISASSEMBLY AND ASSEMBLY 6 – 15
7)
Remove the screw [9] and washer [10].
8)
Disconnect the connector [11].
9)
Remove the two screws [12] to detach the base cover [13].
[11]
10) Remove the four screws [14] to remove the upper transmission
sensor unit [15] and lower transmission sensor [16].
[14]
[14]
[9]
[10]
[13]
[12]
[15]
[16]
[14]