Advertisement
5)
Shift up the stack delivery roller (upper) [4], and then push it
down to detach the stack deliver roller (upper) [4].
6)
Likewise, remove the stack delivery roller (upper) [6] at the
front.
(11) Paddle
1)
Remove the paddle assembly. (See B.(4).)
2)
Place the paddle assembly [1] as shown.
3)
Turn the gear [2] in the direction of the arrow to move up the
stack delivery roller assembly (upper) [3].
[3]
4)
Push up the safety guide [4] from below to free one side of the
safety guide [4] from the shaft [5].
[5]
[4]
[6]
[4]
[1]
[2]
MX-FNX2/AR-PN1/MX-RBX1 DISASSEMBLY AND ASSEMBLY 6 – 9
5)
Push up the safety guide [4] from below to free the safety
guide [4] from the shaft [5].
[5]
6)
Remove the paddle [6] in the direction of the arrow.
7)
Likewise, remove the other paddle.
(12) Stack Delivery Roller (Lower)/Delivery Belt
1)
Remove paddle assembly, and separate it from the processing
tray assembly. (See B.(4).)
2)
Slide the aligning plate (front) [2] and the aligning plate (rear)
[3] of the processing tray assembly [1] by sliding them to the
outside.
[3]
3)
Remove the processing tray stopper [4].
4)
Remove the screw [5], and detach the paper guide (front) [7]
while freeing the two claws [6].
[6]
[4]
[6]
[1]
[2]
[4]
[5]
[7]
Advertisement
Chapters
