Advertisement
a. Inlet Paper Sensor (FED) Delay Jam
Host machine delivery signal
Jam check
Entry paper sensor
(FED)
Feed motor (FFM)
* Variable depending on the paper size. (Because the paper feed speed may differ according to the paper size. (A4:1.0 sec.))
b. Inlet Paper Sensor (FED) Stationary Jam
Jam check
Entry paper sensor
(FED)
Feed motor (FFM)
* Variable depending on the paper size. (Because the paper feed speed may differ according to the paper size. (A4:1.4 sec.))
c. Binding Position Sensor (FFPD) Delay Jam
Jam check
Binding position
sensor (FFPD)
Stack delivery motor
(FAM)
d. Binding Position Sensor (FFPD) Stationary Jam
Jam check
Binding position
sensor (FFPD)
Staple motor (FFSM)
e. Power-On Jam
Paper is detected inside the finisher at power-on or when the door is closed.
f. Door Open Jam
The finisher is disconnected from its host machine or the front door, or the upper cover is opened while the system is in operation (paper on the
move).
g. Staple Jam
The staple drive home position sensor (FSHPD) does not go OFF 600 msec after the stapler is driven. Or, it does not return to its home position
(where the sensor goes ON).
*
approx. 1.0sec.
Normal
*
approx. 1.4sec.
Normal
1080 ms
Normal
approx. 16.2sec.
Normal
MX-FNX2/AR-PN1/MX-RBX1 OPERATIONAL DESCRIPTION 5 – 16
Host machine delivery signal
approx. 1.0sec.
Jam check
Entry paper sensor
(FED)
Feed motor (FFM)
approx. 1.4sec.
Jam check
Entry paper sensor
(FED)
Feed motor (FFM)
1080 ms
Jam check
Binding position
Jam
sensor (FFPD)
Stack delivery motor
(FAM)
approx. 16.2sec.
Jam check
Binding position
sensor (FFPD)
Staple motor (FFSM)
*
Jam
*
Jam
Jam
Advertisement
Chapters
