Paging And Intercom Group; Configure Paging/Intercom Group; Configure Multicast Paging; Figure 177: Multicast Paging - Grandstream Networks UCM630X Series User Manual

PAGING AND INTERCOM GROUP

Paging and Intercom Group can be used to make an announcement over the speaker on a group of phones.
Targeted phones will answer immediately using speaker. The UCM630X paging and intercom can be used via
feature code to a single extension or a paging/intercom group. This section describes the configuration of
paging/intercom group under Web GUI→Call Features→Paging/Intercom.

Configure Paging/Intercom Group

•
Click on "Add" to add paging/intercom group.
•
Click on to edit the paging/intercom group.
•
Click on to delete the paging/intercom group.
•
Click on "Paging/Intercom Group Settings" to edit Alert-Info Header. This header will be included in the SIP
INVITE message sent to the callee in paging/intercom call.

Configure Multicast Paging

Figure 177: Multicast Paging

UCM630X Series User Manual
Version 1.0.11.10
P a g e | 349