Change Log; Firmware Version 1.0.11.10; Firmware Version 1.0.11.9 - Grandstream Networks UCM630X Series User Manual

CHANGE LOG

This section documents significant changes from previous versions of the UCM630X user manuals. Only major
new features or major document updates are listed here. Minor updates for corrections or editing are not
documented here.

Firmware Version 1.0.11.10

•
No major changes.

Firmware Version 1.0.11.9

•
Combined audio meeting and video meeting to multi-media meeting. [MULTIMEDIA MEETING]
•
Updated UCM6301 public meeting room number from 3 to 4. [MULTIMEDIA MEETING]
•
Added operator panel. [OPERATOR PANEL]
•
Added time condition support for IVR key events. [Key Press Event]
•
Supported adding comments for fail2ban whitelist. [Fail2Ban Whitelist]
•
Added Call Flip feature code. [Call Flip]
•
Added cloud IM abnormal alert event. [Cloud IM abnormal]
•
Added option "Play Follow Me Prompt". [Table 42: Table 34: SIP Extension Configuration
Parameters→Follow Me] [Table 47: IAX Extension Configuration Parameters→Follow Me] [Table 52:
FXS Extension Configuration Parameters→Follow Me]
•
Add option "Ignore 180 Response". [Ignore 180 Response]
•
Added Multi-Factor Authentication for UCM login. [Multi-Factor Authentication]
•
Added support for IoT device management. [IOT DEVICE MANAGEMENT]
•
Added remark for UCM system status. [Remark]
•
Added option to enable and disable passwordless for remote access. [Figure 255: UCM RemoteConnect
Plan Settings]
•
Added option to enable and disable virtual queue call back keys settings. [Virtual Queue Callback Key]
•
Added option to enable IPv6 for HA settings. [Enable IPv6]
•
Added Address Book Management section. [Address Book Management]
UCM630X Series User Manual
Version 1.0.11.10
P a g e | 42