To make a direct IP call, please follow the steps below:
1.
Access the dial screen on GVC3220 LCD.
2.
Press
the RED shortcut key on the remote control to bring up call mode setting screen,
set the mode to "SIP".
3.
Input the target IP address. For example, if the target IP address is 192.168.124.123 and the port is
5062, input the following:
192*168*124*123#5062
The * key represents the dot (.) and the # key represents the colon (:).
4.
Press
the BLUE shortcut key on the remote control to select "Audio Call" or "Video Call".
5.
Press
on the remote control to dial out.
Paging/Intercom
Before placing paging/intercom, please make sure the callee has paging/intercom enabled so that it can
answer the paging/intercom call automatically. To make paging/intercom call:
1.
Access the dial screen on GVC3220.
2.
Enter the number to dial followed by *74. Please refer to
GVC3220 User Guide
Version 1.0.0.28
P a g e
|
61