Product Overview; Objective And Deliverable; System Block; Handling Precautions - Fujitsu MB95200H Series Setup Manual

1

Product Overview

This product is a set of Starter Kit (MB2146-410-01-E) of MB95200H/210H series. It is
composed of a BGMA (MB2146-08-E) and an EV-board (MB2146-410-E). Combining the
SOFTUNE Workbench on PC, the Starter kit enables the quick start of development before
the user system is ready.

1.1 Objective and Deliverable

The Starter kit (MB2146-410-01-E) provides users a complete development platform. Before
start using the Starter Kit, make sure that the following devices are placed in the package:
BGMA (MB2146-08-E)
EV-board (MB2146-410-E)
USB cable
CD-ROM (SOFTUNE, user manuals, sample code)
Hardcopy (China RoHS report, quick start guide)
AA battery

1.2 System Block

To setup a debugging system, connect a PC, a BGMA and an EV-board together as shown
below:
Sample code
Host PC
SOFTUNE
IDE

1.3 Handling Precautions

The Starter Kit can be used in connection with its bundled products. To ensure correct use of
this product in a proper environment, observe the following guideline:
Follow the instructions described in each manual for the bundled product to use this
product.
Starter Kit MB2146-410-01-E Setup Guide V1.1
Chapter 1 Product Overview
BGMA
USB
Figure 1.2-1 System Block
MCU-UM-500002-E-11 – Page 1
1PCS;
1PCS;
1PCS
1PCS
1PCS
4PCS
Easy design and study
MB95200H/210H
with BGMA and SOFTUNE
MB95200H/210H
MCU
Target Board
MCU