1.4 Feature
The F2MC-8FX starter kit is the best for a performance and functional evaluation, and a
check of operation before including F2MC-8FX in a user's system.
Below, the feature of the BGM debugger for F2MC-8FX is shown.
Microcomputer operation voltage It corresponds to +2.7V to +5.5V.
(The maximum and minimum of microcomputer operation voltage and frequency of
operation differs with each MCU. refer to the documents (a data sheet, hardware
manual, etc.) of each device relation for the operation voltage and frequency of MCU of
operation.)
Compact development environment, a light and small BGM Adapter.
Since a monitor program is performed in exclusive memory space, it does not consume
user memory space.
Continuation execution, step execution and break correspondence.
It connects with a host computer by the USB interface.
1.5 Hardware Setup
In the hardware setup procedure, you configure and connect the hardware products. This
chapter includes the configuring and connecting procedure for each product in order. Check
the contents and complete the hardware setup.
Configuration of each product
- Configuring EV-Board
Connection of each product
- Connecting BGMA and EV-board
- Connecting EV-Board power supply
Starter Kit MB2146-410-01-E Setup Guide V1.1
Chapter 1 Product Overview
MCU-UM-500002-E-11 – Page 2