Key Module; Lin-Uart Module - Fujitsu MB95200H Series Setup Manual

3.4.7 Key Module

Key S1 and key S2 are provided to demonstrate an external interrupt function. Enable these
two keys by the following table.
Key S1 is connected to external Int7, and key S3 is connected to external Int6.
Modules
Key:
S1, S2

3.4.8 Lin-UART Module

Lin-UART module can be configured as a LIN or an UART module. Enable each module by
the following table.
The UART module features an RS232 transceiver and a standard DB9 interface with PC.
Lin module enables a easy setup of Master/Slave communication by a Lin bus.
Modules
UART
LIN**
**LIN module is optional; contact your local distributor for the EV-board with a LIN module.
Starter Kit MB2146-410-01-E Setup Guide V1.1
Chapter 3 EV-board Manual
Header name
SW2: S1, S2
Table 3.4.7-1
Header name
SW2: SOT, SIN
J5: UART
J6: UART
SW2:
SCK, SOT, SIN
J5: LIN
J6: LIN
Table 3.4.8-1
MCU-UM-500002-E-11 – Page 14
Settings
Settings