Advertisement
1. Overview
This document addresses the steps necessary to install and setup the TeamPoS36xx
add-in ATI Video Adapter Card, which is necessary if multi-display use is
desired.
Note: This card cannot be used with Windows 7 – there are no
drivers available.
2. ATI Adapter Installation and Initial Setup
Install the ATI Video Adapter in the available TeamPoS36xx PCI slot.
Connect display (s) to the ATI Adapter connectors. The ATI Adapter supplies VGA and
DVI connectors.
Start the system and enter BIOS Setup pressing the DEL key when prompted during
power-up POST sequence.
On the Advanced Chipset Features screen, set the PEG/Onchip VGA Control setting
to PEG Port.
Save BIOS settings and exit BIOS setup.
TeamPoS36xx
ATI Video Card Installation
3
Advertisement
