Table of Contents
Advertisement
Adapter Problems
Problem
Possible Solution
Host adapter is
The PCI system in your computer is supposed
not found.
to configure the bus address locations
automatically. An address conflict is probably
not the problem. If the driver is correctly
installed, a driver message should appear in
the system driver event log after bootup of your
computer.
1 Make sure the adapter card is seated
2 Check for correct configurations of the
3 Ping the failed system from another host on
4 Reseat the adapter card.
The card cannot
1 Check the network cable and all connections.
communicate with
2 Try to ping other hosts on the network from
other hosts on the
network.
Adapter Problems
correctly in the bus expansion slot. Try
another PCI slot. Try another adapter that is
known to operate correctly.
network cable into the adapter card. Verify
the cable is properly connected at both
ends. If the cable is connected correctly, the
Link LED will be on.
the network.
your host computer.
5-3
Advertisement
Table of Contents
