Table of Contents
Advertisement
2
H
ARDWARE
Installation Overview
This section describes the procedure for installing
the 3C971-F adapter hardware in your host
computer. Follow all applicable instructions included
with your system documentation for installing PCI
bus adapters. Hardware installation consists of
these basic steps:
Unpack the 3C971-F ATMLink PCI adapter.
Turn off the power to your computer and remove the
computer cover. Refer to your system
documentation for specific instructions.
Install the 3C971-F adapter in an available PCI slot.
Replace the computer cover.
Connect the appropriate cables.
Turn on the power to the computer.
Please observe all special notes and precautions.
For technical specifications on the 3C971-F adapter
hardware, see Appendix A.
Tools Required
The only tools required are a grounding strap and a
#1 Phillips head screwdriver.
I
NSTALLATION
Advertisement
Table of Contents
