Configuring The Lan Emulation Clients (Lecs); Reboot Prompt For Adapter Driver - 3Com 3C971-F ATMLINK User Manual

3-14 C 3: W
HAPTER
needed, you can use dummy IP numbers for the
disabled clients.
19 Select OK when the TCP/IP Configuration is
complete.
The reboot prompt shown in Figure 3-9 appears.
Figure 3-9 Reboot Prompt for Adapter Driver
20 Select Restart Now to reboot the computer.
Go to the next section to continue the installation of
the 3C971-F adapter driver.
Configuring the LAN Emulation Clients (LECs)
The LEC applications software included with your
3C971-F adapter provides a method for allowing
one ATM adapter to communicate with up to four
LAN emulation servers (LESs) at a time. In a typical
LAN emulation network, the LAN emulation
configuration server (LECS) provides a central point
of contact for LAN emulation clients to obtain
configuration information. The LECS provides the
client with the MTU (Maximum Transfer Unit) size,
ELAN name, and ATM address for the host LES. If
your network does not contain an LECS, you have
the option for setting each client to contact and join
an LES directly instead of contacting the LECS.
NT D I
INDOWS RIVER NSTALLATION