Advertisement
Memory function
116
Press memory button M : and one of the
X
arrows on adjustment button ; within three
seconds.
The parking position is stored if the exterior
mirror does not move.
If the mirror moves out of position, repeat the
X
steps.
After successfully storing, reset the driving
X
position of the exterior mirror.
Calling up a stored parking position
Turn the key to position 2 in the ignition lock
X
(
page 145).
Y
Adjust the exterior mirror on the front-
X
passenger side using button =.
Engage reverse gear.
X
The exterior mirror on the front-passenger
side moves to the stored parking position.
The exterior mirror on the front-passenger side
moves back to its original position:
as soon as you exceed a speed of 15 km/h
R
about ten seconds after you have disengaged
R
reverse gear
if you press button ? for the exterior mirror
R
on the driver's side
Memory function
Important safety notes
G
WARNING
If you use the memory function on the driver's
side while driving, the adjustments could
cause you to lose control of the vehicle. There
is a risk of an accident.
Only use the memory function on the driver's
side while the vehicle is stationary.
G
WARNING
When the memory function adjusts the seat or
steering wheel, you and other vehicle occu-
pants – particularly children – could become
trapped. There is a risk of injury.
While the memory function is making adjust-
ments, make sure that no one has any body
parts in the sweep of the seat or steering
wheel. If somebody becomes trapped, imme-
diately release the memory function position
button. The adjustment process is stopped.
G
WARNING
If children activate the memory function, they
could become trapped, especially if they are
unattended. There is a risk of injury.
When leaving the vehicle, always take the key
with you and lock the vehicle. Never leave
children unattended in the vehicle.
The memory function can be used at any time,
e.g. even when the key is not in the ignition lock.
Storing settings
With the memory function, you can store up to
three different settings, e.g. for three different
people.
The following settings are stored as a single
memory preset:
position of the seat, backrest and head
R
restraint
driver's side: position of the exterior mirrors
R
on the driver's and front-passenger sides
position of the head-up display
R
Adjust the seat accordingly (
X
On the driver's side, adjust the steering wheel
X
(
page 111) and the exterior mirrors
Y
(
page 113).
Y
Press memory button M and then press save
X
position button 1, 2 or 3 within three sec-
onds.
The settings are stored in the selected preset
position. A tone sounds when the settings
have been completed.
page 104).
Y
Advertisement
