Advertisement
If you come into contact with electrolyte,
observe the following:
immediately rinse off electrolyte from your
R
skin with water.
immediately and thoroughly rinse electro-
R
lyte out of eyes using clean water.
if electrolyte is swallowed, immediately
R
rinse out your mouth thoroughly. Do not
induce vomiting.
if electrolyte comes into contact with skin
R
or eyes or is swallowed, seek medical atten-
tion immediately.
immediately change out of clothing that has
R
been in contact with electrolyte.
if an allergic reaction occurs, seek medical
R
attention immediately.
The rear-view mirror and the exterior mirror on
the driver's side automatically go into anti-daz-
zle mode if the following conditions are met
simultaneously:
the ignition is switched on
R
incident light from headlamps strikes the sen-
R
sor in the rear-view mirror
The mirrors do not dip if reverse gear is engaged
or if the interior lighting is switched on.
Parking position of the exterior mirror
on the front-passenger side
Storing the parking position
You can set the front-passenger side exterior
mirror so that you can see the rear wheel on that
side as soon as you engage reverse gear. You
can store this position.
Using reverse gear
Memory button M
:
Adjustment button
;
Button for the exterior mirror on the front-
=
passenger side
?
Button for the exterior mirror on the driver's
side
Turn the key to position 2 in the ignition lock
X
(
page 145).
Y
Press button = for the exterior mirror on the
X
front-passenger side.
Engage reverse gear.
X
The exterior mirror on the front-passenger
side moves to the preset parking position.
Use adjustment button ; to adjust the exte-
X
rior mirror to a position that allows you to see
the rear wheel and the kerb.
The parking position is stored.
i
If you shift the transmission to another posi-
tion, the exterior mirror on the front-
passenger side returns to the driving position.
Using the memory button
You can store the parking position of the exte-
rior mirror on the front-passenger side using
memory button M :. The reverse gear must not
be engaged.
Turn the key to position 2 in the ignition lock
X
(
page 145).
Y
Press button = for the exterior mirror on the
X
front-passenger side.
Use adjustment button ; to adjust the exte-
X
rior mirror to a position that allows you to see
the rear wheel and the kerb.
Mirrors
115
Z
Advertisement
