Bluetooth Settings - Samsung Rugby SGH-I847 User Manual

WPS Button Connection
The WPS (Wi-Fi Protected Setup) button is a standard for easy
and secure wireless network set up and connections. To use
WPS, the connecting device must support WPS and be
compatible with Wi-Fi Protected Access (WPA) security. WPS can
automatically set up a random network name and WPA wireless
security for wireless Wi-Fi phones, routers, access points,
computers, adapters, and other electronic devices.
WPS allows you to push buttons instead of entering a network
name and wireless security PIN.
From the Home screen, tap
1.
and network Wi-Fi settings.
Tap WPS button connection.
2.
Press the WPS button on your Wi-Fi access point within 2
3.
minutes.
Auto connect
The Auto connect option allows you to be automatically
connected to an AT&T Wi-Fi Hotspot as soon as your phone
detects it.
From the Home screen, tap
1.
and network Wi-Fi settings.
Settings Wireless
Settings Wireless
Tap Auto connect to create a check mark.
2.
Auto connect is enabled.

Bluetooth settings

In this menu you can activate Bluetooth, view or assign a device
name, activate your phone so other Bluetooth devices can
discover it, or scan for other, available Bluetooth devices with
which to pair.
Activating Bluetooth
From the Home screen, tap
and network Bluetooth settings and tap Bluetooth to turn
it on.
Note: Bluetooth must be enabled prior to use.
Device Name
Activate Bluetooth. For more information, refer to "Turning
1.
Bluetooth On and Off" on page 126.
From the Home screen, tap
2.
and network Bluetooth settings and tap Device name.
The assigned device name displays.
Settings Wireless
Settings Wireless
Changing Your Settings 94