Table of Contents
Advertisement
• Forward when busy allows you to forward voice calls to a
designated number instead of your Voicemail number if you are on
another phone call.
• Forward when unanswered: allows you to forward voice calls to a
designated number instead of your voicemail number when there is
no answer on your phone. You can also select the amount of time
that the phone delays before forwarding.
• Forward when unreachable: allows you to forward voice calls to a
designated number instead of your voicemail number when you are
not in an area covered by your service provider or when your phone
is switched off.
TTY Mode
This menu is used to activate or deactivate TTY Mode for this
device.
From the Call Settings menu, tap TTY mode.
1.
Tap Full TTY. A green checkmark will appear. Tap TTY mode
2.
off to turn it off.
Additional settings
From the Call Settings menu, tap Additional settings.
1.
Tap one of the following options:
2.
• Caller ID: allows you to choose how your Caller ID will be displayed.
Select Network Default, Hide number, or Show number.
101
• Call waiting: the network service informs you when someone is
trying to reach you during another call. Tap to activate.
• Auto redial: automatically redials the last number if the call was
either cut off or was unable to connect. Tap to activate.
• Noise suppression: Your phone is equipped with an advanced
voice processing chip that delivers clear mobile calls by
suppressing background noise, intermittent sounds (like a siren or
nearby conversation), and echoes, allowing you to hear and be
heard nearly anywhere. Tap to activate.
• Fixed Dialing Numbers: allows you to restrict outgoing calls to a
limited set of phone numbers.
Using Fixed Dialing Numbers
FDN (Fixed Dialing Number) mode restricts your outgoing calls to
a limited set of phone numbers. When this feature is enabled,
you can make calls only to phone numbers stored in the FDN list
on the SIM card.
Enabling FDN
From the Call Settings menu, tap Additional settings
1.
Fixed Dialing Numbers.
Tap Enable FDN.
2.
At the prompt, enter your PIN2 code and tap OK.
3.
FDN is enabled.
Advertisement
Table of Contents
